Aluminum Floor Mats Create a Glow for Tuners

Diamond plate floor mats are becoming the new hot item for tuner cars. Added with some interior accent lighting, these aluminum floor mats can create a really remarkable finish for your interior. You can purchase a precut set for your vehicle, or you can create a completely custom look. There are both aluminum floors and aluminum floor mats, and if you choose to create and customize them yourself, here are the guidelines to follow when taking on your newest project!
These instructions can be used to create a complete aluminum floor or aluminum floor mats.
1) If you don't have a template to use, such as an existing floor mat, you can remove the existing carpet. Removing the seats will make this task much easier, if you can remove them. If you do this, try to keep the carpet in as close to one piece as possible, since it will be reinstalled.
2) Lay out a sheet of diamond plate material. The diamond plate should be the polished and soft slate kind. Lay it out on the floor, with the polished side up.
3) Lay your carpet or floor mats on top of it, good side up, and begin marking it for your cuts. If you are aiming for just the floor mats, mark the outline for those. If you want to go all out and do the full flooring in diamond plate, trace out the whole carpet piece. Take note of the slots where the seat bolts will penetrate the diamond plate floors, and drill the appropriate size holes. It may be wise to drill them larger than the bolts to allow a little play for proper positioning in the vehicle. Also give yourself a little extra material on the edges and trim to perfection once in the vehicle. Otherwise you may end up with an unwanted gap. Replacing the whole carpet will be a little more difficult, but follow these steps, and you should end up with a great looking interior.
4) Cut the diamond plate using a saber saw, or a good jig saw with a metal bit. Trim any needed areas for the perfect fit, and sand the edges down smooth, being careful not to sand or scratch the polished surface.
5) If you are creating floor mats only, reinstall the carpet. Drill holes in the four corners of the floor mats and position them on the carpet. Screw them in place with stainless steel screws, or secure them in place with pop rivets.
6) If you are creating the whole flooring out of the diamond plate material, now is a good time to rerun any aftermarket speaker wires or cables. Start in the center of the vehicle. With the seats removed, put the diamond plate material in place and gently roll it over the contours of the center of the vehicle, being sure to start in the middle and work outwards. It should be flexible enough to contour to the floor nicely. Continue forming it all the way out to the door trim (which should be removed with the carpet) and fit the seat bolts through the diamond plate floor. If you have any extra material that needs to be trimmed, you can do it with a good set of tin snips, or by marking the material that should be removed and cutting it outside the vehicle.
7) With the diamond plate material in place, find several good secure points, and drill some pilot holes for your stainless steel screws or pop rivets. Fasten it in place. If you are satisfied with the results, reinstall the seats and the door trim. The diamond plate floors will look awesome with a little interior accent lighting!
Some people even like to place some carpeted floor mats over the diamond plate floors. If you choose to do this, make sure the back of the floor mats are not made of a material that will scratch the diamond plate. It may be wise to put a backing on it and secure it in place as well.
If you find you need further assistance with your diamond plate flooring installation or customization, contact Majestic Modifications by emailing us at support@majesticmodifications.com.

Featured Neon Kits

Featured Neon Lighting Accessories at Majestic Modifications

Undercar Neon Lighting Kit

Each under car kit comes with 2-48" tubes for the sides, 2-36" tubes for the front and rear, built in transformers in each tube to simplify installation, all necessary installation hardware and instructions. Each neon bulb is encapsulated in high impact silicone to withstand the toughest road conditions and elements. The Neon Series was designed for the do it yourselfer and hobbiest in mind. Quick installation and consumer friendly pricing make this a winner for any auto neon enthusiast. Underbody neon tubes are not limited to undercar application they are also great for truck bed rails,engine compartment,anywhere imaginable (simple 2 wire installation) basically any application which requires a longer lighting configuration.
Includes:
Extra Wire
Mounting Brackets
Connecting Block
Tubes Sealed in High Impact Acrylic For Maximum Protection
Includes an on/off switch.

Available in 8 colors: Blue, Red, Green, White, Purple, Yellow, Pink, and Orange

Check out these neon kits and other hot car accessories at Majestic Modifications!